CPSystemBD. 4000-35 PCS Primerless Coating System by Polyken

System description

Polyken 4000-35 PCS is a cold applied coating system designed for the corrosion protection of field joints, fittings, and specialty piping .This system does not require a primer or liquid adhesive. This versatile coating system can be applied by hand or with a wrapping machine.
Polyken 4000-35 PCS can be applied to wire brushed or sandblasted pipe surface. The high-tack butyl rubber adhesive is designed for high initial adhesion even during extreme cold weather applications. The tacky adhesive has a plastic release liner to enable proper unwinding of the roll. Coupled with the highly conformable polyethylene backing, the adhesive optimally flows, fills and instantaneously bonds to the substrate.

Product Features & Benefits
No primer needed Labor saving application. Environmental friendly Eliminates VOC emissions. Eliminates dangers associated with a hazardous product. Compatible with generic plant coating systems Versatile	Heavy duty high-tack adhesive Ensures a strong bond & impervious seal. Meets AWWA C209 standard Reliable high performance corrosion protection Conforms to irregular shapes Offers a solution for nearly every application. For above and below ground use Flexible
Product Selection Guide

Operating temperature range	30°F( -34°C) to 122°F ( 50°C )
Additional mechanical layer	955 or 954
Compatible line coatings	PE, FBE, Tape and Coal Tar DS-4000-35-PCS-REV1-1206
Recommended pipe preparation	SSPC-SP2, SP3 and SP6 ST 2 ½ - ST3
Performance	AWWA C209

Product Construction

Total Thickness	35 mils (0.89 mm)
Backing	6.5 mils (0.17 mm)
Adhesive	28.5 mils ( 0.72mm)
Backing color	Black