ACPro Induced AC Mitigation Ribbon by Farwest Corrosion

Pipeline corrosion, caused by induced AC current, is attributed to high voltage AC power lines in close proximity to a pipeline system. The corrosion can be extremely aggressive, far exceeding the normal corrosion rate caused by corrosive soils. Induced AC current can also be a safety issue to humans and must be effectively mitigated to reduce potential hazards. There are a number of methods to mitigate the risk and the correct solution will depend on many factors. 

AC mitigation systems are simply electrical “grounding” systems that provide an effective electrical path to remove or discharge AC current from the pipeline to the ground. In some cases, several solutions may be employed for this purpose, but whatever the methodology, the goal is to remove the AC current from the pipeline in a safe and controlled manner. 

As mentioned, there are a number of mitigation solutions that can be utilized, but one of the most popular is a linear grounding or mitigation system that is installed in parallel to the pipeline. Farwest Corrosion’s ACPro mitigation ribbon is designed for this purpose and is comprised of a bare copper conductor (cable) encased in a synthetic sock and filled with Loresco PowerFill^TM, low resistivity backfill that is specially formulated to protect the copper conductor from corrosion. 

 The ACPro factory manufactured product is 1.5 inches in diameter and suitable to be installed parallel to the pipeline through trenching, plowing or directional drilling. For easy splicing, the copper conductor “pig tail” extends 24” from the end of the sock. 

ACPro Product Drawing

ACPro Product Details

• Conductor: #6, #2 or #1/0 AWG bare, 19 strand copper

• Backfill: Loresco PowerFill^TM

• Casing: 1.5” diameter synthetic fabric sock with abrasion resistant polypropylene braid

 ACPro Product Advantages

• Easy handling and installation

• Cost effective

• Low electrical resistivity

ACPro Product Specifications

ACPro Standard 1000’ Reel Details