CPSystemBD. Chlor*Test "CSN Salts" Chloride/Sulfate/Nitrate Ion Test Kit By Chlor*Rid Int'l

CHLOR*TEST "CSN Salts"
A new Generation of Test Kits

Most specifications do not address sulfate or nitrates because there has never been a sulfate or nitrate field test kit. Now there is a complete field test kit available that tests all three salts. The revolutionary new method for testing salt contamination is the most accurate field test on the market today.

Cross-contamination is eliminated with one-time use components.

Nitrate testing is easy and measures a wide 0-50 ppm range.

Easy to perform -- does not require special training.

Recommended for surface testing on: Pipelines Storage tanks Bridges Aircraft Mining facilities Ships Marine structures Cooling towers Power plants Offshore rigs Petrochemical plants Pulp and paper mills Steel fabrication Electronics *CHLORTEST "CSN Salts" offers to the specifier the availability of trouble-free performance testing, in the field, for chlorides, sulfates and nitrates with one extraction. CHLORTEST "CSN Salts"* uses a unique patented extract solution, CHLOREXTRACT™, to retrieve surface salt contamination. This special extract enhances retrieval rates, thereby increasing accuracy. The greater the retrieval rate, the more accurate the test results. Surface sampling is simplified by use of the patented CHLORSLEEVE™. Sampling can be done overhead, vertically, horizontally, or at any angle with this device.
All test results are measured directly in parts per million. No conversion charts are needed. Part-per-million readings are a 1-to-1 ratio to micrograms per square centimeter. No mathematical calculations are necessary. EPA-compliant. No need to select a low or high range. Meter range is 0-100 ppm with auto-zero. European CE Mark of compliance for electromagnetic compatibility and safety. Quantitative results achieved in minutes. Five (5) individual tests per test kit. Test kit refills available.
	All components are pre-measured and pre-dosed for accuracy.

Colorimeter Specifications

Water resistant design
Auto-zero
Hinged light cover
Digital direct readings
European CE-mark compliant
EPA-compliant
9-volt power source (included)
Single wavelength
Photometric ±0.001 absorbancy
Accuracy ±1 ppm
Low battery warning (BAT)
Overrange indication (Er2)
Burnt-out bulb indication (Er3)

Optional Accessories

AC adapter: 110 Vac, 60Hz, or 220 Vac, 50 Hz
RS-232 interface cable