Model FE Through Wall, Extreme Environment Reference Electrode by EDI

Description

The Model FE is designed to operate in extreme environments with high temperatures, high pressures and / or contaminated electrolytes where ordinary reference electrodes cannot survive. A permanent bridge is installed at each location where potential readings are desired. The reference element is contained in a separate housing which isolates it from the aggressive environment; this substantially increases its service life. When continuous readings are required, the reference is threaded into the bridge. For intermittent readings, the reference is simply pressed into the bridge. This allows a single reference to be used with several bridges. Further details are shown on the following pages.

Typical Applications

• Oil separators, heater treaters, bleach tanks, industrial boilers and process vessels.

Features

• Two-piece design which isolates the reference element from the environment.
• Permanently installed bridge fabricated from G-10 (a glass reinforced epoxy) should not need replacing.
• Removable CPVC housing which contains the reference element.