CPSystemBD. Pipeline Coating Systems SUMMARY Page, by Polyken

Polyken On-Site Coating Systems

Polyken offers a series of coating systems designed specifically for in-field applications on new construction pipe or reconditioning of existing pipelines. In-field or in-situ installation is economical and efficient. When Polyken cold-applied coating systems are used, a small investment in manpower and application equipment yields a big return in productivity and long-term performance. The reconditioning systems can be applied on existing operating pipelines, which means no loss of revenue or downtime. Polyken's non-toxic and environmentally safe materials ensure application-friendly conditions along the right-of-way (ROW).

Pipe Wrap, Joint Coatings & Accessory Products

Pipe Wrap, Joint Coatings & Accessory ProductsPolyken carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.

Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
ROW construction: Rockshield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.
Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Polyken^® has the tape coating for the job.

Product	Uses & General Characteristics	Total Thickness	Adhesion to Primed Steel Pipe	Maximum Temperature
1027	Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors.	N/A	N/A	100°C 212°F
910	All-purpose tape system for field application in the oil patch.	0.25 mm 10 mil	11 N/10 mm 100 oz/in	66°C 150°F
900	General utility tape for hand application on small diameter pipe, joints and fittings.	0.30 mm 12 mil	11 N/10 mm 100 oz/in	66°C 150°F
930(-35)	Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use.	0.89 mm 35 mil	25 N/10 mm 225 oz/in	66°C 150°F
932(-35)	Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified.	0.89 mm 35 mil	28 N/10 mm 250 oz/in	66°C 150°F
932(-50)		1.27 mm 50 mil	28 N/10 mm 250 oz/in	66°C 150°F
934(-35)	Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping.	0.89 mm 35 mil	28 N/10 mm 250 oz/in	66°C 150°F
934(-50)		1.27 mm 50 mil	35 N/10 mm 320 oz/in	66°C 150°F
939	100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems.	3.17 mm 125 mil	33 N/10 mm 300 oz/in	93°C 200°F
954	Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outerwrap) (outerwrap) machine application.	0.38 mm 15 mil	N/A (outerwrap)	85°C 185°F