Powercrete R-95

Powercrete R-95
0.00৳
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

Description

Powercrete® R-95 is a high-build solvent free novolac epoxy coating designed for protecting new line pipes and pipeline rehabilitation projects that operates at temperatures up to 95˚C (203˚F). Powercrete® R-95 can be used for extra protection on top of FBE mainline coatings or as a DTM (drirect to metal) coating when an increased temperature-and chemical resistance is required.
 

Features

  • 100% Solids Novolac Epoxy
  • no VOC
  • high temperature and chemical resistance
  • Excellent adhesion to FBE and abrasive blasted steel
  • Excellent cathodic disbondment characteristics
  • Excellent wastewater and sulphuric acid resistance
  • Suitable for pipeline operating temperatures to 95°C (203°F)
  • Can be sprayed and hand applied up to 1000micron (40mils) in one multi-pass layer 

 



Product Performance 
(processing under laboratory conditions) 

  Test MethodTypical Value
Cathodic Disbondment ASTM G8 (25˚C) (77˚F) 30days3mm
 ASTM G95 (95˚C) (203˚F) 30days8mm
FlexibilityNACE RP-03940.27˚/PD at 23˚C/73˚F
Impact ResistanceASTM-G1468in/lb/7.6Nm/7.6J at 40mils/1000micron
Adhesion to FBEASTM D4541 3000psi/20MPa
Adhesion to SteelASTM D45413500psi/22MPa
Adhesion to Steel,90 D
HWI at 85˚C(185˚F)
ASTM D45413130psi/21MPa
Abrasion ResistanceASTM D4060850cycles a mil
(34 cycles/micron)
Resistane to Acids & AlkainsASTM C581 Excellent
Dielelctric StrengthASTM D149 690V/mil (27V/micron)
Thin film Water ImmersionASTM D570 0.15% (24 hours)
HardnessASTM D224085 Shore D

 

General Product Information

ColorGrey
FinishGloss
PrimerSelf-priming on FBE and DTM
Dry Film Thickness40mils (1000micron) for most applications
Coverage Rate (theoretical)40.8 sq.ft/USG at 40mils (1000micron)DFT. 1,00m^2 /l at 40mils (1000micron)DFT.
Volume Solids100%
VOC Content0 g/l
Flash Point154˚C (309˚F) mixed product
Mixing Ratio3:6:1 (A to B in volume) 100:16 (A to B by weight)
Potlife14 minutes at 25˚C (77˚F)