Temcoat & Temcoat 3000 Anticorrosion Compounds by Trenton

 
Description

Trenton Temcoat & Temcoat 3000 are used as anticorrosion compounds for above ground and below ground surfaces. They can be used as a cold-applied coating with a wrapper or as a priming paste with Trenton Wax-Tapes. Because of their paste-like consistency over a wide temperature range, they are excellent materials for filling voids. They can be used for straight pipe, irregular fittings and flat surfaces.

Temcoat & Temcoat 3000 are high-temperature microcrystalline wax-based coating compounds that will not melt and can be applied at ambient temperatures up to 200°F. They do not require a primer or curing time, and are easily applied by hand.

Advantages

• Withstands high ambient temperatures.
• Goes on easily by hand.
• No primer required.
• No waiting for drying or curing.
• Non-hazardous, no VOCs.
• Minimal surface preparation
• Can be applied to wet pipe. 
   

Wire brush and wipe the surface clean of any loose coating, rust, scale and foreign matter. Then apply Temcoat by hand directly to the surface. At higher temperatures, Temcoat can be applied by brush. On wet surfaces, rub and press firmly to displace moisture and ensure adhesion. For below ground applications to protect Temcoat from mechanical abrasion, overwrap with Poly-Ply, Guard-Wrap or # 1 Wax-Tape. For aboveground applications, overwrap with #2 Wax-Tape.

Packaging

3-gallon pails (approx. 24 lbs/pail)
1-gallon can (4 gallons/case)
32 lbs/case