Test Leads, Probes & Clips Multimeter Accessories by Fluke

AC120 Alligator Clips

Set of three safety designed insulated Probe Tip Alligator Clips. Designed for use with STL 120 and TL75 Test Leads. Accepts standard 0.08’’ (2 mm)-pin tip sized test probes. Nickel-plated steel jaw contact material with standard jaw opening of 5/16’’ (8 mm).

• Maximum Voltage: 600Vrms CAT III per IEC 1010-2-031
• Maximum Current: 10A
• Material: Nickel-plated steel jaw
• Jaw Opening: 5/16’’ (8 mm)

AC220 SureGrip™ Alligator Clips

Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair of small, insulated, nickel plated jaws.

• Blunt tip grabs round screw heads up to 9.5 mm
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
• One year warranty

AC280 SureGrip™ Hook Clips

Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair of nickel plated clips.

• Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base.
• Recommended for use with TL222 and TL224 test leads.
• CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed.
• One year warranty

AC283 SureGrip™ Pincer Clips

Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• One pair (red, black) of nickel plated pincers open to 5 mm.
• 11.4 cm flexible insulated shaft.
• Recommended for use with TL222 and TL224 test leads.
• CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed.
• One year warranty

TL40 Retractable Tip Test Lead Set

• One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm.
• Extra hard probe tips to provide long service life.
• Flexible silicone insulated test leads
• CAT III 300 V, 3 A rating, UL listed.
• One year warranty

AC285 SureGrip™ Alligator Clips

Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• One pair (red, black) of large alligator clips with nickel-plated steel jaws.
• Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt.
• Recommended for use with TL222 and TL224 test leads.
• CAT IV 600 V; CAT III 1000 V, 10 A rating.
• One year warranty

TL220 SureGrip™ Industrial Test Lead Set

Handy all-in-one kit that includes:

• AC220 SureGrip™ Alligator Clip Set
• TP220 SureGrip™ Test Probe Set
• TL222 SureGrip™ Silicone Test Lead Set (right to right)
• One year warranty

TL221 SureGrip™ Test Lead Extension Set

Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• One pair of silicone insulated leads with straight connectors on both ends.
• Reinforced strain relief.
• Includes one pair (red, black) of female couplers.
• Extends test leads by 1.5 m.
• 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed.
• One year warranty

TL222 SureGrip™ Silicone Insulated Test Leads

Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
• Right angle connector on both end.
• Reinforced strain relief.
• 1.5 meter silicone-insulated wire resists heat and cold.
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed.
• One year warranty

TL223 SureGrip™ Electrical Test Lead Set

Handy all-in-one kit that includes:

• AC220 SureGrip™ Alligator Clip Set.
• TP1 Slim-Reach™ Test Probes (flat bladed.
• TL224 SureGrip™ Silicone Test Lead Set (straight to right).
• One year warranty

TL224 SureGrip™ Insulated Test Leads

 Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
• Right angle connector on one end and straight connector on the othe.
• Reinforced strain relief.
• 1.5 meter silicone-insulated wire resists heat and cold.
• CAT IV 600 V, CAT III

TL27 Heavy Duty Test Lead Set

• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
• Heavy duty EPDM insulation.
• Length 1.5 m.
• CAT III 1000 V, 10 A rating. UL listed.
• One year warranty

TL40 Retractable Tip Test Lead Set

• One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm.
• Extra hard probe tips to provide long service life.
• Flexible silicone insulated test leads.
• CAT III 300 V, 3 A rating, UL listed.
• One year warranty

TL71 Premium Test Lead Set

• One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads.
• Recommended for µV measurements.
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed.
• One year warranty

TL75 Hard Point™ Test Lead Set

• One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plug.
• Recommended for general purpose measurements.
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed.
• One year warranty

TL910 Electronic Test Probes

• Very small 1 mm tips to access hard to reach test points
• Probe tip length up to 100 mm, test lead length: 1 m
• Included : 3 sets of spring loaded gold tips and 2 sets of stainless steel tips
• CAT IV 600 V, CAT III 1000 V, 3 A rating
• One year warranty

TL930 Patch Cords (60 cm)

• 1 pair (red, black) multi-stacking 4 mm banana plug patch cords
• Nickel-plated banana plugs
• 61 cm long PVC insulated leads
• 30 V rms or 60 V DC, 15 A
• One year warranty

TL932 Patch Cords (90 cm)

• 1 pair (red, black) multi-stacking 4 mm banana plug patch cords
• Nickel-plated banana plugs
• 90 cm long PVC insulated leads
• 30 V rms or 60 V DC, 15 A
• One year warranty

TL940 Mini-Hook Test Leads

• 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks
• Mini-hooks attach to component leads up to 1.5 mm diameter
• 90 cm long PVC insulated leads
• 30 V rms or 60 V DC, 15 A
• One year warranty

TL950 Mini-Pincer Test Leads

• 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers
• Mini-pincers open to 2.3 mm
• 90 cm long PVC insulated leads
• 30 V rms or 60 V DC, 15 A
• One year warranty

TL28A Automotive Test Lead Set

• Large jaws, long leads and a piercing probe for penetrating larger gauge wires..
• Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth.
• 1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F).
• Rated for 30 V, 10 A. One red, one black.

BP980 Double Banana Plug Kit

• 5 pair (red, black) of double 4 mm banana plugs
• Each plug has 3.1 mm holes for mounting wires and components.
• Brass plugs/jack, beryllium copper springs.
• 30 V rms or 60 V DC, 15 A
• One year warranty

H900 Test Lead Holder

• Heavy duty construction with mounting holes.
• Holder has 10 slots for wires up to 8 mm in diameter.
• Over-all dimensions: 27.9 cm L x 8.9 cm W x 3.2 cm H
• One year warranty

TLK-220 US SureGrip™ Industrial Test Lead Set

Special value SureGrip Set for industrial applications. Includes two sizes of alligator clips and sharp test probes for reliable connections, test leads and a roomy carry case to hold and protect your meter and all your accessories. All 1000 V CAT III, 600 V CAT IV rated. Included with set:

• AC220 Plunger Style Alligator Clips
• AC285 Large Jaw Alligator Clips
• TP220 Sharp Test Probes
• TL224 Right to Straight Test Lead
• Zippered Vinyl Carry Case with Moveable Divider